Isocheck Screedcheck XL5: impact improvement system



Isocheck PRIMO & PRIMO HL Isocheck ULTIMO Isocheck 32T Isocheck 37T Isocheck 27C, 23C & 14C Isocheck 28T, 24T & 15T Isocheck RENOVO Isocheck Deep Batten Isocheck Shallow Batten Isocheck Cradle Isocheck Barrier Mat 5 & 10 Isocheck Impact Mat 100, 200 & 300 Isocheck Re-Mat 3 & Re-Mat 5 Isocheck Re-Mat Base 3 & 6 Isocheck Re-Cork 3 & Re-Cork 5 Isocheck Screedcheck XL5 Isocheck Screedcheck XL8 Isocheck Screedcheck XL10 Isocheck Phonewell Isocheck Absorba ceiling & wall panels Isowave System 23 for Walls Isowave System 23 for Ceilings Accessories

 
Isocheck Screedcheck XL5 Datasheet
download
product data sheet
   
 
Isocheck Screedcheck XL5 Installation
download
installation instructions
     


0845 838 3399

•  Conversions
•  New Build

The Isocheck Screedcheck XL5 system is designed to be placed within a masonry structural floor directly below the screed. This isolates the screed from the structural sub floor, and provides sufficient impact absorbsion to place it amongst the top performing systems available.

The isocheck screedcheck XL5 system from Isomass features a 5mm closed cell cross linked foam layer.

By ensuring that all the joints are taped, bridging will be eliminated which is the single greatest cause of failure of any system of this type.

When installed correctly, the screedcheck XL5 system will enable compliance with Approved Document E 2003 and subsequent amendments in 2004, 2010 and 2013.

Benefits

Closed cells prevents water absorbsion which can impair acoustic performance.

Rolls are light and easy to handle.

All installations over 500m2 come with a free site pre screed inspection.

Performance (on the construction illustrated)

Treated floor with:
DnT,w+ Ctr
L’nT,w
Screedcheck XL5
50dB
≤45dB

based upon the typical construction (commonly 50dB+).

Product data

Roll dimensions:
1.5m wide x 50m
Thickness: 5mm
Foam composition: Closed Cell Cross Linked Isopoli

Specification

The acoustic floor shall be:

Isocheck Screedcheck XL5 system, supplied by Isomass Ltd. Units 10 & 11, Avenue Business Park, Elsworth, Cambridgeshire, CB23 4EY and installed in accordance with manufacturer’s instructions / recommendations.

Installation

The floor surface should be swept free of any loose debris that may damage or bridge the system.

Screedcheck XL5 can be rolled up the wall or lapped and taped to a perimeter flanking strip. Either option should allow a minimum 50mm to protrude above the intended FFL of the screed (see right).

Adjoining roll edges should be butt-jointed jointed and sealed with a minimum 100mm wide jointing tape.

Services that penetrate the screed should be isolated by wrapping with Underscreed which again would be taped.

When trafficing the floor take care not to perform any unecessary actions that may cause any of the taped joints to be forced apart.

Full installation instructions for screedcheck XL5 are available upon request. These must be used in conjunction with this booklet when laying the screedcheck XL5 system.

PCT  
Photo

To view a photograph mouse over the camera icon above


Isocheck Screedcheck XL5
  • 80kg/m2 sand/cement screed or 65mm proprietary screed.
  • Optional (1000 gauge or 0.25mm) plastic sheeting - to aid screed pouring and maintain joints in screedcheck XL5.
  • Isocheck Screedcheck XL5 on grouted sub floor.
  • ≥300kg/m2 minimum structural sub floor.
  • 75mm min. void formed by metal frame suspended ceiling system and ≥10kg/m2 gypsum board ceiling.

 

 

 

 

© 2006-2015 Isomass Ltd. | Terms & Conditions | Privacy Policy | Accessibility Statement

 

Designed by jpatl.com